Humidity Chamber apparatus, Humidity cabinet machine Heating & cooling chamber - $3,590 - (Iselin, NJ)
DESCRIPTIONS:- General specification as made out of stainless steel. The temperature can be controlled from 5° C to 50° C ± 2°C and humidity from 30% to 95% ± 5% RH Temperature below ambient is controlled by hermetically sealed compressor complete with accessories provided below the unit. Two stainless steel water reservoirs heated by immersion heaters are provided to create humidity. Complete with all accessories. Control panel provided with control switches and indicators.The manual of Digital Temp. Controller is enclosed with this manual but you shouldn’t try to pre set the program for maintaining accuracy of temperature. The Digital Temp. controlled the temperature before 15 to 20 as the set temperature and temperature will be increase or decrease slowly and maintain it on highest point as your requirement. The Humidity controlled the humidity before 20 to 30 as the set humidity and humidity will be increase slowly and maintain it on highest point as your requirement.CALIBRATIONThe Automatic Control System incorporated into the Model 99 QW Controlled Environmental Chamber is calibrated prior to leaving the factory. However, as with all humidity and temperature measuring instruments, it should be recalibrated periodically to maintain its specified performance. Calibration of the System should be checked at least once or twice a year depending on the operating conditions and the required measurement accuracy. Complete calibration of the System is performed in two parts. The first part requires calibration of the Humidity and Temperature Control Units. The second part requires calibration of the humidity and temperature sensors in conjunction with the Control Units. Both the Control System and the sensors are easily removed from the Chamber by the following procedure: Open the large front door and loosen the hex cap on the bulkhead fitting holding the humidity (bottom) and the temperature (top) sensors in place. Push the sensors in towards the electronics…
ADVERTISEMENT
From ebay.com - 1 month ago